Get in touch

Equipment & Capabilities

At SMS Laser Cutting we can laser cut virtually any shape you can draw with no minimum order quantity and no expensive tooling costs.

Equipment & Capabilities

State-of-the-art equipment

AMADA LC-2515C1AJ Punch/Laser Combination
AMADA ENSIS 3015 AJ
AMADA Alpha IV 1212
Amada EG6013 Brake Press – 60 Tonne
AMADA HG1303 CNC Press Brake
AMADA HDS8025 NT PRESS BRAKE
Multicam SRX3618VI CNC Router
Tekcel CNC Router with a 3000 x 1550mm cutting bed
TROTEC SPEEDY 400 FLEX
HAEGAR INSERTION PRESS 618
Mark Forged Mark Two 3D Printer

AMADA LC-2515C1AJ Punch/Laser Combination

The LC-2515C1AJ provides maximum production flexibility by integrating AMADA’s innovative multipurpose turret design and proven fibre laser technology.  This combination of technologies allows us to perform multiple processes on one machine.  Processes such as tapping, forming and laser cutting can all be programmed to maximise part accuracy and machine productivity.

All our equipment Arrow-red

AMADA ENSIS 3015 AJ

The ENSIS Series uses AMADA’s proprietary fibre laser technology to process both thin and thick materials without a cutting lens change or manual setup.

All our equipment Arrow-red

AMADA Alpha IV 1212

The LC-ALPHA series not only compels with extremely short piercing times but also with high travel and cutting speeds. Optimum cutting conditions are always achieved, even at high speeds or under plasma.

All our equipment Arrow-red

Amada EG6013 Brake Press – 60 Tonne

The EG 6013 is a ultra precise, lightening fast compact bending solution featuring a dual electric servo drive system.
Dual servo power drive system – Extremely quick approach, bending and return speeds; allows for faster cycle times and increased throughput in terms of more parts per hour.

All our equipment Arrow-red

AMADA HG1303 CNC Press Brake

AMADA’s new HG press brake series can handle a full range of material thicknesses in bend lengths from 55 to 169.3 inches. Equipped with a newly developed AMNC 3i control, the HG series provides high speed and accuracy.

All our equipment Arrow-red

AMADA HDS8025 NT PRESS BRAKE

AMADA’s slit crowning feature ensures consistent angle accuracy, including auto-crowning technology that provides precise results based on AMNC-PC calculations.

All our equipment Arrow-red

Multicam SRX3618VI CNC Router

Multicam CNC routing machines are recognised as industry leaders for flat bed CNC routing.  The Multicam SRX3618VI comes with vacuum hold down beds, fully automatic tool changers, fully automatic material loading and unloading systems, integrated dust extraction systems, dual head gang drill attachments, allowing for fast delivery times and expediting accurate results.

All our equipment Arrow-red

Tekcel CNC Router with a 3000 x 1550mm cutting bed

Tekcel CNC routers can load sheet material and unload the processed parts off the bed automatically, allowing for fast delivery times and expediting accurate results.

All our equipment Arrow-red

TROTEC SPEEDY 400 FLEX

The patented CeramiCore® laser source technology offers reliability, the highest engraving quality and longevity. Thanks to the InPack Technology™, the sensitive components of the laser engraving machine, such as lenses, mirrors or motors, are protected against dust and allows for precise accuracy.

All our equipment Arrow-red

HAEGAR INSERTION PRESS 618

The 618 fully hydraulic, 6 tonnes (54kN) ram force and 18 inch (457mm)  throat depth, allows easy access to large parts.  Variable dwell timer for use with hard materials.  Fastener range M2 to M10.  Haeger has the ability to provide you with a totally unified solution for virtually any of your insertion challenges.

All our equipment Arrow-red

Mark Forged Mark Two 3D Printer

Continuous Fiber Composite 3D Printer.  The Mark Two prints versatile parts with 26x the strength of ABS, ready same-day for use straight off the printer.  Print precise parts with best-in-class surface finish.

All our equipment Arrow-red
Equipment & Capabilities

Materials

We work with a wide range of materials, keeping a large selection on site to speed up production times. We are also happy to source materials that aren’t kept in-house, or laser cut any material that you provide. Our team is always happy to discuss tolerances and cut quality before the start of any project.   

Mild steel

Mild steel (Grades 250, 350)

A popular option with a lot of our clients. It is usually treated to prevent corrosion
We are able to laser cut steel all grades up to 25mm thick.

Stainless steel

Stainless steel (Grades 304, 316)

One of our most popular materials, we always keep a supply at our shop.
We can laser cut stainless steel up to 16mm thick.

Galvanised steel

Galvanised steel

Zinc-sealed, zinc annealed.
We can laser cut up to 3mm thick.

Corten steel

Corten steel

A weathering steel that slowly oxidises but without rusting away completely. After a while, it turns a dark orange, creating a stunning effect that is popular with architects and artists alike.
We are able to laser cut Corten steel up to 6mm thick.

Aluminium

Aluminium Grades 5005, 5052, 5083

Its lightness, strength, durability and corrosion resistance make it aluminium the ideal choice for many applications.
We can laser cut aluminium plates from 1mm to 12mm.

Brass

Brass

We can laser cut brass up to 8mm thick.

Copper

Copper

As with brass, we use nitrogen to prevent any discolouration during the manufacturing process.
We can laser cut copper up to 6mm thick.

Timbers

Timbers

We laser cut:

  • MDF, MRMDF and veneered MDF up to 50mm
  • Particle board (Laminex, yellow tongue, melamine and chipboard) up to 40mm
  • Plywood (interior, exterior, multiply, marine, Formply) up to 50mm
  • Weathertex up to 10mm
  • Soft solid timber (Oregon, cedar, cypress, pine) up to 40mm
  • Hard solid timber (Merbau, eucalyptus, oak, mahogany) up to 40mm
Plastics

Plastics

All our plastics are cut with a smooth, clean and burr-free edge.

We laser cut:

    • Acrylic (Perspex, Plexiglass, Lucite) up to 20mm
    • Polycarbonate up to 20mm
    • Polyethylene up to 20mm
Finishings

Finishings

We have an in-house painting facility, as well as professional partners in finishing to provide complete end-to-end services.

  • 2-Pac polyurethane painting
  • Powder coating
  • Galvanising
  • Polishing
Mild steel

Mild steel (Grades 250, 350)

A popular option with a lot of our clients. It is usually treated to prevent corrosion
We are able to laser cut steel all grades up to 25mm thick.

Stainless steel

Stainless steel (Grades 304, 316)

One of our most popular materials, we always keep a supply at our shop.
We can laser cut stainless steel up to 16mm thick.

Galvanised steel

Galvanised steel

Zinc-sealed, zinc annealed.
We can laser cut up to 3mm thick.

Corten steel

Corten steel

A weathering steel that slowly oxidises but without rusting away completely. After a while, it turns a dark orange, creating a stunning effect that is popular with architects and artists alike.
We are able to laser cut Corten steel up to 6mm thick.

Aluminium

Aluminium Grades 5005, 5052, 5083

Its lightness, strength, durability and corrosion resistance make it aluminium the ideal choice for many applications.
We can laser cut aluminium plates from 1mm to 12mm.

Brass

Brass

We can laser cut brass up to 8mm thick.

Copper

Copper

As with brass, we use nitrogen to prevent any discolouration during the manufacturing process.
We can laser cut copper up to 6mm thick.

Timbers

Timbers

We laser cut:

  • MDF, MRMDF and veneered MDF up to 50mm
  • Particle board (Laminex, yellow tongue, melamine and chipboard) up to 40mm
  • Plywood (interior, exterior, multiply, marine, Formply) up to 50mm
  • Weathertex up to 10mm
  • Soft solid timber (Oregon, cedar, cypress, pine) up to 40mm
  • Hard solid timber (Merbau, eucalyptus, oak, mahogany) up to 40mm
Plastics

Plastics

All our plastics are cut with a smooth, clean and burr-free edge.

We laser cut:

    • Acrylic (Perspex, Plexiglass, Lucite) up to 20mm
    • Polycarbonate up to 20mm
    • Polyethylene up to 20mm
Finishings

Finishings

We have an in-house painting facility, as well as professional partners in finishing to provide complete end-to-end services.

  • 2-Pac polyurethane painting
  • Powder coating
  • Galvanising
  • Polishing

Let's talk about
your project

©2024 SMS Laser Cutting. All Rights Reserved Privacy Policy and Terms & Conditions
Website by HEARD AGENCY
By using this website, you acknowledge that you have read and understand the Privacy Policy. It appears you're using an old version of Internet Explorer which is no longer supported, for safer and optimum browsing experience please upgrade your browser.